zmldy 发表于 2014-3-4 09:38

ansoft

剖分时错误提示： Wrong band mesh.Suggested solutions: (1). Add the InnerRegion to wrap all moving objects. (2). Specify smaller normal deviation angle to InnerRegion (suggested angle is twice as much as band object surface). (3). If the band gap very is small, a small segment is needed for band object so that the smooth curvature can be built on band surface. (4). Band object has true surfaces, but no mesh operation or operation is too large.请大侠详细指导。本人将不甚感激。

zptonghua 发表于 2014-3-8 14:58

这样的问题最好上传模型

zmldy 发表于 2014-3-10 10:00







zptonghua 发表于 2014-3-10 13:14

您好，为什么什么都没加呢？源呢？motion设置呢？

zmldy 发表于 2014-3-17 16:34

我自己做的时候都加上了，我以为只给你传模型就可以。后来我又试了试不报错了，可以算了。谢谢！
页: [1]
查看完整版本: ansoft