求助一个jmag的问题
mesh时候出现
The problem occurred in contact face
It failed in the recognition of contact face.
Therefore, the Mesh is not created.
FACE ID:17
FACE ID:582
Solution1.Please confirm whether a position of solid face correspond accurately. When not corresponding, please correct the position of the model. Tolerance for contact is 1.000000e-009.
Solution2.Please add the division line in this model so that the edge line of the face appear on other face.
Solution3.When there are small solid faces, Please correct the model shape to be lost of the small solid faces.
貌似是永磁体和磁钢的面有交接
我该怎么处理啊
我是初学者 唉 求助啊 从SW建模导入的模型，生成网格时遇到同样的问题，不知道如何去解决。 里面有多种mesh供你尝试，standard mesh, slide mesh，几种模式都尝试一遍试试，还有，就是网格尺寸不要设置太大，也不要太小，多种方式都尝试尝试
页:
[1]