How configure memory in Flux 10.4
本帖最后由 lijo 于 2009-1-22 08:10 编辑hu hu
I have a Lenovo ThinkPad X61 with Windows Vista 32bit Bussines with 4GB of RAM, internal 1GB Intel TurboMemory for Drive Cache and 4GB extreme III (clase 6) SD for ReadyBoost. I have optimice the not necesary services with VistaManager.
My model have over 90000 elements and the solver say
not enough memory for run superLU (It run in older version of LU 8.1)
How configure the memory into flux2d with Vista 32 ?
How much memory to put the solver?
I have changed values in memory options (Flux supervisor), but the operating system if I do not case or Yes?
Thanks in advance 您在这个memory设置过了吗？设置完成记得点击apply键，然后从新打开， hu hu
I have a Lenovo ThinkPad X61 with Windows Vista 32bit Bussines with 4GB of RAM, internal 1GB Intel TurboMemory for Drive Cache and 4GB extreme III (clase 6) SD for ReadyBoost. I have optimice t ...
lijo 发表于 2009-1-22 08:00 http://www.simol.cn/images/common/back.gif 好像将character memory 设置大一些能解决求解计算内存不够的问题 flux 10.4 is a new version of flux 10.2? 1# lijo
我按照该方法进行了设置，但是还是没有解决这个问题，谁能再给我说说，谢谢了，很着急的. what is the problem ? 你的选择：
1，增加机器内存
2，修改内存设置
3，把求解器进行修改，有的求解器不需要占用很多内存
4，适当降低剖分密度，
5，如果有非线性和不收敛的情况，可以适当减小求解的精度为1e-3，或者更小
6，减小非线性求解的迭代次数
。。。。。。。 7# lijo
我是按照例子进行的flux and simulink coupling，
但是提示我“ not enough numerical memory for superlu” 7# lijo when I start running simulink,the error occurs 例子里的版本是原来的，8点几或者9点几的版本做的，所以你可以更改以下求解器的类型 11# flux_softwave
例子是9.3的 多谢分享联合仿真资料 回复 1# lijo
Hi, lijo.
Could you tell me where to download the Flux 10.4 and how to crack? Flux 10.4 is a beta2 prerelease.
PM 谢谢8楼的总结，很有用。 学习一下，我也遇到同样的问题 我用win7 64位，机器内存16G。FLUX内存设置超过1800MB之后，就不能启动了，不知道何故
页:
[1]