owenql 发表于 2013-5-15 15:41

FLUX 3D后处理中，能否显示全模型？

在3D建模时采用对称条件，但是到了后处理，想显示全部模型，一直没有找到，请高手指点。
是不是FLUX 3D没有这个功能？

Demir.James 发表于 2013-5-17 19:59

in cedrat flux 10.3 it's not possible to see the full 3D model bu in higher version such as 10.4 or 11 there is tap in toolbar for seeing full view.

owenql 发表于 2013-5-20 10:51

Demir.James 发表于 2013-5-17 19:59
in cedrat flux 10.3 it's not possible to see the full 3D model bu in higher version such as 10.4 or...

Got it! Thanks foryour reply!

Demir.James 发表于 2013-5-20 23:39

do study about electrical machines?

owenql 发表于 2013-5-21 16:07

Demir.James 发表于 2013-5-20 23:39
do study about electrical machines?

No, induction heating

Demir.James 发表于 2013-5-22 04:43

so you should study mechanical engineering.
if you need newer version of flux I can help you.

owenql 发表于 2013-5-23 15:28

Demir.James 发表于 2013-5-22 04:43
so you should study mechanical engineering.
if you need newer version of flux I can help you.

I have version 10.4 already. however, a serious problem occured about a month ago. you can see the follow article if you have interesting: FLUX 10.4破解后提示没有激活
http://bbs.simol.cn/forum.php?mod=viewthread&tid=124799&fromuid=52687
(出处: 西莫电机论坛)
much thanks.

xiaomutongzhang 发表于 2014-11-19 15:39

英语杠杠的哟——哈哈，学习了！！牛人
页: [1]
查看完整版本: FLUX 3D后处理中，能否显示全模型？