3D仿真出错！！求解！！
求大侠！！帮助解释一下原因！！检查的时候没问题！算一会就蹦出这个问题了！！ 我也遇到这样的问题，解决了吗？ 我也遇到这个问题了！我的是3D盘式电机！双外转子加中间定子！Could not map middle points on the moving mesh band.Possible causes are: 1) Motion setup is not correct. 2) The model uses rotational motion, the geometry is less than a full circle, and master-slave boundaries were not defined on the surfaces of the wedge. 3) The model uses translational motion, and true surface curves were used on the band object or on the outermost faces of moving objects. 4) Extremely small gaps or faces exist in the geometry. These may need to be removed or enlarged. 楼主问题解决了吗？ 我的问题跟楼主的基本一样的！我的是3D盘式电机！双外转子中间定子！双band的！ Could not map middle points on the moving mesh band.Possible causes are: 1) Motion setup is not correct. 2) The model uses rotational motion, the geometry is less than a full circle, and master-slave boundaries were not defined on the surfaces of the wedge. 3) The model uses translational motion, and true surface curves were used on the band object or on the outermost faces of moving objects. 4) Extremely small gaps or faces exist in the geometry. These may need to be removed or enlarged.
页:
[1]