op22 发表于 2013-5-4 18:45

Jmag后处理怎样显示气隙磁密波形？

Jmag后处理怎样显示气隙磁密波形？求大虾指点迷津....感激不尽..

nimotor 发表于 2013-5-4 23:30

Hi,
after calculation, right clickon results and then select New contour plot , there should be many options to plots :)

good luck!

op22 发表于 2013-5-5 09:23

nimotor 发表于 2013-5-4 23:30 static/image/common/back.gif
Hi,
after calculation, right clickon results and then select New contour plot , there should be m ...

Sincerely thanks for your reply,when select New contour plot, there is no airgap flux density curve to plot,Is there any other methods to display the airgap flux density like below?

nimotor 发表于 2013-5-5 20:17

C:\Users\rzeszowm\Desktop\flux.jpghi,
no problem, click results, select Section ->right click -> choose new arc line in section (not air region) -> then choose magnetic flus density, and write radius diameter (air gap).

op22 发表于 2013-5-6 18:38

nimotor 发表于 2013-5-5 20:17 static/image/common/back.gif
hi,
no problem, click results, select Section ->right click -> choose new arc line in section (not...

Thank you so much.it done...{:soso_e183:}

nimotor 发表于 2013-5-7 04:07

Your welcome
if you have any questions, feel free to ask

op22 发表于 2013-5-7 17:59

nimotor 发表于 2013-5-7 04:07 static/image/common/back.gif
Your welcome
if you have any questions, feel free to ask

Thanks, you are a good guy.

sowha 发表于 2013-6-7 16:04

{:soso_e100:}

hitamy509 发表于 2016-1-25 19:16

谢谢解答了，我也学习了

1467107665 发表于 2016-3-28 00:27

谢谢，我也学到东西了！

IPM马达 发表于 2016-5-17 00:02

本帖最后由 IPM马达 于 2016-5-17 00:05 编辑

选中results下面的section，右键“New Arc”，然后根据下图设置就可以做出气隙弧线了，这样就可以跟踪这条弧线上的磁密曲线了



zy1986 发表于 2016-9-26 12:28

nimotor 发表于 2013-5-7 04:07
Your welcome
if you have any questions, feel free to ask

有没有 进行方案筛选与推荐、参数化优化方面的资料么？十分感谢

隔壁老王 发表于 2017-12-8 09:58

nimotor 发表于 2013-5-5 20:17
hi,
no problem, click results, select Section ->right click -> choose new arc line in section (not...

hello,I have some question with JMAG,can I make friend with you？QQ? MSN? Wechat?

隔壁老王 发表于 2017-12-8 16:03

IPM马达 发表于 2016-5-17 00:02
选中results下面的section，右键“New Arc”，然后根据下图设置就可以做出气隙弧线了，这样就可以跟踪这条 ...

您方便加QQ好友吗，小弟初学软件，有些问题希望您指教

benjaminliu 发表于 2018-6-27 18:59

nimotor 发表于 2013-5-4 23:30
Hi,
after calculation, right clickon results and then select New contour plot , there should be m ...

Hi, nimotor. Thanks for your answer about the Jmag. Now I have a question about the T-n Curve of PMSM. Can you help me?

Little_Ze 发表于 2018-7-31 10:16

感谢楼上大神的讲解，学到了

Little_Ze 发表于 2018-7-31 10:57

IPM马达 发表于 2016-5-17 00:02
选中results下面的section，右键“New Arc”，然后根据下图设置就可以做出气隙弧线了，这样就可以跟踪这条 ...

右键section会出现两个选项，请问是选择section还是air region呢？前面的帖子说选择section，但是我们要得到的不是气隙磁密吗？求大神解答，谢谢
页: [1]
查看完整版本: Jmag后处理怎样显示气隙磁密波形？