电机圈首页 › 『风力发电』 › 直驱永磁风力发电机文章

xiaozhu198 发表于 2010-2-1 12:05

研究研究…谢谢楼主

xidian203 发表于 2010-2-2 23:28

好东西谢谢了楼主

normahxh_002 发表于 2010-2-5 20:40

第一本书的摘要
ABSTRACT
The rotor of a typical wind turbine rotates at a speed of 20-200 rpm. In conventional wind
power plants the generator is coupled to the turbine via a gear so that it can typically rotate at a
speed of 1000 or 1500 rpm. The wind power plant can be simplified by eliminating the gear and by
using a low-speed generator, the rotor of which rotates at the same speed as the rotor of the turbine.
The hypothesis in this work is that the typical generator-gear solution in the wind power plant can
be replaced by a low-speed PM synchronous generator.
This thesis deals with the electromagnetic design and the optimisation of two types of lowspeed
generators for gearless wind turbines. The generators designed are radial-flux permanentmagnet
synchronous machines excited by NdFeB magnets. The machines have different kinds of
stator windings. The first machine has a conventional three-phase, diamond winding. The second
machine has a three-phase, unconventional single-coil winding consisting of coils which are placed
in slots around every second tooth. The electromagnetic optimisation of the machine is done by the
finite element method and by a genetic algorithm combined with the finite element method. The
rated powers of the machines optimised are 500 kW, 10 kW and 5.5 kW. Two prototype machines
were built and tested.
The optimisation of the machines shows that the cost of active materials is smaller and the pullout
torque per the cost of active materials higher in the conventional machines than in the singlecoil
winding machines. The torque ripple can be reduced to a low level by choosing a suitable
magnet and stator slot shape in both the designs. The demagnetisation of permanent magnets is
easier to avoid in the single-coil winding machines than in the conventional designs. The
investigation of various rotor designs shows that the rotor equipped with curved surface-mounted
magnets has various advantages compared with the other rotor designs, for instance pole shoe
versions. The analysis of the machines also shows that the load capacity of the machine is lower in
a diode rectifier load than that when connected directly to a sinusoidal grid.
According to the analysis, a typical generator-gear solution of the wind power plant can be
replaced by a multipole radial-flux PM synchronous machine. The conventional diamond winding
machine is a better choice for the design of a directly driven wind turbine generator but the singlecoil
winding machine is also suitable because of its simplicity.

xidian203 发表于 2010-2-7 21:27

志趣和双亏到底那个好。

渤海蓝天 发表于 2010-2-22 15:38

不错，很值得看的！

lele01 发表于 2010-4-8 14:07

多谢分享。。。。。

yilin0312 发表于 2010-4-15 11:07

英文的就不看了，怪累的！

qiiyu 发表于 2010-4-16 11:14

下了，多谢LZ

uswarrior 发表于 2010-6-1 13:00

吐血下载，希望能有帮助
谢了

hustzheng 发表于 2010-6-10 09:32

下载学习恶补风电知识谢谢楼主

frankapdl 发表于 2010-6-17 13:14

永磁发电机不知道最大可以做到多大？ 5MW?

yjhou 发表于 2010-7-22 11:46

楼主下次发文的时候先简要介绍一下。

aneeyou 发表于 2010-7-22 13:49

还记得大学的时候我老是让我翻译外文,找PM什么意思就是找不出来,最后问他他自己都不知道pm..我就郁闷了,现在看到 pm 还是有点亲切啊,下下来翻译~

fenglin1511 发表于 2011-12-8 19:51

不错的资料

xidian203 发表于 2011-12-16 19:29

好文章，谢谢了。

wfj778899 发表于 2013-6-17 17:34

双馈的还是直驱的啊！！

motor11 发表于 2013-7-19 10:57

英文还是中文？

name’ZS 发表于 2014-4-30 09:47

好好看看。。。。。。。。。。。。。

928740 发表于 2019-1-27 12:15

这篇文章2000年左右发表的，偏向基础电磁学的永磁同步发电机

tjxlms130 发表于 2020-1-16 11:27

我下载了，非常感谢

查看完整版本: 直驱永磁风力发电机文章