giuseppe 发表于 2012-7-11 01:21

关于flux仿真多个运动物体的问题看这里

What requirement I have to respect when modelling several mobile parts in Flux?

With Flux it is possible to model several mobile parts using the sliding surface method.
The requirement when modelling several mobile parts are the following :
Same type of motion (translation or rotation) for all mobile parts ;
Fixed area between each two mobile parts.
Example : Two mobile parts rotating at different speeds are separated by a fixed air area.

20041199 发表于 2012-7-11 09:27

回复 1# giuseppe

你有没有试过可压缩空气？

kt133a 发表于 2012-7-11 09:28

同样关注，等待高手解答

giuseppe 发表于 2012-7-12 00:18

回复 2# 20041199


   没有, 我没做过多个运动物体的例子, 就是看到这个FAQ就转贴过来了

不过compressible是不是只在2d legacy里才用, 新的3d solver已经不再需要了

20041199 发表于 2012-7-12 09:49

回复 4# giuseppe

是的，3D中不需要这个
页: [1]
查看完整版本: 关于flux仿真多个运动物体的问题看这里